Locations and Facilities

  • Hamilton maintains operational/administrative offices in our Trans Amadi facility sited on a total land area of 6398.10 sqm and another base/land area of 2,812.365sqm

    Address Plot 226, Block C, Trans Amadi Industrial Layout, Phase 11, Port Harcourt.

     

    WAREHOUSE

    Hamilton Technologies Limited maintains a warehouse with the following dimensions;

    •       Total floor area: 1,014.30 sqm and 1,152 sqm respectively

    •       Open front shed: 91.50 sqm and 350.4 sqm respectively

    •       Open drum area: 114.24 sqm

    •       Admin Block      : 438.53 sqm

    •       Security Block   : 15.91 sqm

     

    QA/QC Laboratory

     Also in our Trans Amadi facility, is a fully equipped laboratory for QA/QC testing of barite, bentonite etc . along with performing and researching all types of drilling and completion systems.

     

    GENERAL

    2 Forklift , 2 Perkins Generators (27 and 60 KVA respectively), 13 Trucks (8-flat bed & 5-Bulk), 1 Land Rover Defender, 2 Staff shuttle Toyota Hiace bus, 3 Toyota Hilux etc.

  • •       Warehouse: 1000 sqm

    •       Quay Side-1): 2030 sqm, Quay Side- 2) 1531sqm, Quay Side-3) 1500 sqm

    •       MUD PLANT

    LIQUID DRILLING FLUID STORAGE (38,990bbls)

    SYNTHETIC/WATER BASED DRILLING FLUIDS MIXING TANKS

    BULK STORAGE-30,000 cu ft

    • Oil base mud Storage - 16 x 1000bbls

    •Base Oil Storage - 1 x 8500bbls + 2 x1000bbls


    •Brine/H2O/WBM Storage - 6 x 500bbls


    •Mud Tanks - 3 x 1,000bbls


    •Mud Tanks - 4 x 1,200bbls


    • Water Tank - 1 x 1,000bbls


    • Agitators - 4 x 5HP Derrick Horizontal Mud Agitators UL Class 1


    •LMP  Laboratory - 1 x 20ft Container

     

    •OBM Mixing Tank - 2 x 300bbls

    •Brine Mixing Tank - 1 x 350 bbls

    •Water Storage - 1 x 2000ltrs

     

    • Dry bulk tank-silos-barite             -  12 x 2000 cu ft

    • Dry bulk tank-silos-bentonite     -  9 x 2000 cu ft

    • Dry bulk tank-silos-CaCo3             -  8 x 2000 cu ft

    • Dry Bulk Tank – Gel                         -  1 x 650 cu ft

    • Weight scale tank            70MT/ All tanks being reconfigured

    • Compressor                       2 x 400 CFM/  1 x 700 cfm

    • Mixing Pumps            4 x Mission Magnum 6x8x14 centrifugal powered by Cat Detroit Diesel Engine.

    • Hopper - Mission Happy Hopper with 6” inlet and 2”nozzle.

    • Cutting Bottle- 2 x 220 Cubic Feet

    • Krohne Ultrasonic Flow Meter - 1 set